MIL-DTL-70951A (AR)
3.2.9 Liner, cover. The components and assemblies shall comply with all requirements
specified on drawing 12926863.
3.2.10 Spacer. The components and assemblies shall comply with all requirements
specified on drawing 12914629.
3.2.11 Latch-handle assembly. The components and assemblies shall comply with all
requirements specified on drawing 12914628.
3.2.12 End cap, cover panel. The components and assemblies shall comply with all
requirements specified on drawing 12914626.
3.2.13 End cap, base panel. The components and assemblies shall comply with all
requirements specified on drawing 12934728.
3.2.14 Trunnion. The components and assemblies shall comply with all requirements
specified on drawing 12934729.
3.2.15 Doubler, base. The components and assemblies shall comply with all
requirements specified on drawing 12914621.
3.2.16 Forkwell. The components and assemblies shall comply with all requirements
specified on drawing 12914622.
3.2.17 Pin, pivot. The components and assemblies shall comply with all requirements
specified on drawing 12914627.
3.2.18 Packing and marking 155mm projectile pallet (Field Artillery Projectile Pallet
assembly). The pallet assemblies shall comply with all requirements specified on drawing
12914619.
3.3 Stacking strength. The pallets shall withstand a 5,000 pound minimum (min.)
stacking load.
3.4 Welding. The welding shall comply with the requirements of MIL-W-12332 or MIL-
W-21157 and weld callouts in the applicable drawings.
3.5 Weld integrity.
3.5.1 Visual inspection. The load bearing surface welds (forkwell welded to base panel)
of the base assembly (see dwg. 12914620) shall be free of the following defects:
a. Undercut
b. Overlap
c. Surface cavities
d. Surface cracks in weld metal or in heat affected zone of base metal
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business