INCH-POUND
MIL-DTL-70951A (AR)
28 NOVEMBER 2007
SUPERSEDING
MIL-P-70951 (AR)
24 MARCH 1992
DETAIL SPECIFICATION
PALLET, FIELD ARTILLERY PROJECTILE
This specification is approved for use by the U.S. Army Armament Research
Development and Engineering Center (ARDEC), and is available for use by all
Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers requirements and provisions for the manufacturing
and assembly of field artillery projectile pallets (FAPP) for use in unitizing 155MM projectiles
(see 6.1).
1.2 Classification. The field artillery projectile pallet shall be classified as follows (see
6.1 and 6.2):
1.2.1 Type I - FAPP with latch rod assembly having rod length of 23.66 inches.
1.2.2 Type II - FAPP with latch rod assembly having rod length of 31.49 inches.
Comments, suggestions, or questions on this document should be addressed to the Commander,
U.S. Army ARDEC, ATTN: AMSRD-AAR-QES-E, Picatinny, NJ 07806-5000 or emailed to
ardecstdzn@conus.army.mil . Since contact information can change, you may want to verify the
currency of this address information using the ASSIST Online database at
https://assist.daps.dla.mil.
AMSC N/A
FSC 8140
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business