MIL-DTL-45449C
specified in the contract or order (see 6.2). When packaging of materiel is to be performed by
DoD or in-house contractor personnel, these personnel need to contact the responsible packaging
activity to ascertain packaging requirements. Packaging requirements are maintained by the
Inventory Control Point's packaging activities within the Military Service or Defense Agency, or
within the military service's system commands. Packaging data retrieval is available from the
managing Military Department's or Defense Agency's automated packaging files, CD-ROM
products, or by contacting the responsible packaging activity.
6.
NOTES
(This section contains information of a general or explanatory nature that may be helpful but is
not mandatory.)
6.1 Intended use. This specification covers the material, construction and design
of wood pallet units used for the movement and storage of ammunition projectiles with
mechanical handling equipment.
6.2 Acquisition requirements. Acquisition documents should specify the
following:
a. Title, number and date of this specification, and of all reference documents
cited in section 2.
b. Packaging requirements (See 5.1).
c. Requirements for first article (See 4.2).
d. Requirements for acceptance inspection equipment designs (See 6.3).
e. Certification of conformance requirement for each lot or shipment of product.
f. Requirements for the establishment of visual standards at first article and whenever
anomalies occur in production.
g. Provision for Quality Management System.
h. Ammunition Data Cards
6.3 Submission of contractor Acceptance Inspection Equipment (AIE) designs for
approval. Submit copies of designs as required to: Commander, U.S. Army RDECOM-ARDEC,
ATTN: RDAR-QEM-A, Picatinny Arsenal, NJ 07806-5000. This address will be specified on
the Contract Data Requirements List, DD Form 1423 in the contract.
6.4 Approval of equivalent test methods. Prior approval of the Contracting Officer is
required for use of equivalent test methods. A description of the proposed method should be
submitted through the Contracting officer to: Commander, U.S. Army Armament Research,
Development and Engineering Center, ATTN: RDAR-QEM-A, Picatinny Arsenal, NJ
07806-5000. This description should include but not be limited to the accuracy and precision and
drawings of any special equipment required.
22
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business