MIL-STD-1660A
U.S. ARMY DEFENSE AMMUNITION CENTER
AC200000331 - Sling, Adjustable, Double Basket AC200000332 - Sling, Multiple Leg Projectile Pallet AC200000398 - Sling, Multiple Leg Top-Lift Ammunition Pallet
ACV00561 - Unit Load Marking for Shipment and Storage, Ammunition and
Explosives
ACV00617 - Pnuematic Sealles Combination Tool for 3/4" Steel Strapping
(Clipless Seals)
AMC 19-48-4116-20PA1002 - Basic Procedures - Unitization Procedures for Boxed Ammunition and Components on 4-Way Entry Pallets
DA PAM 746-1 - Pallets and Storage Aids for Army Use
(Copies of these documents are available from the U.S. Army Defense Ammunition Center, Transportation Engineering Division, 1C Tree Road, Building 35, McAlester, OK 74501-9053 or online at https://www3.dac.army.mil/.)
CODE OF FEDERAL REGULATIONS (CFR)
46 CFR 146.29-180 - Regulations Governing the Transportation of Military Explosives and
Hazardous Munitions on Board Vessels
49 CFR 170-178 - Hazardous Material Regulations of the Department of Transportation
(Copies of these documents are available from the Superintendent of Documents, U.S. Government Printing
Office, Washington DC 20401 or online at www.gpoaccess.gov/index.html.)
2.3 Non-government publications. The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
AMERICAN LUMBER STANDARD COMMITTEE, INCORPORATED
Voluntary Product Standard PS 20 - American Softwood Lumber Standard (DoD Adopted) (Copies of this document are available from the American Lumber Standard Committee, Incorporated, P.O. Box
210, Germantown, MD 20875-0210 or online at https://www.alsc.org/untreated_ps20_mod.htm.) AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI S1.1 - Acoustical Terminology
(Copies of these documents are available from the American National Standards Institute, 25 W. 43rd St, 4th
Floor, New York, NY 10036 or online at https://webstore.ansi.org/.) ASTM INTERNATIONAL
ASTM D3953 - Standard Specification for Strapping, Flat Steel and Seals (DoD Adopted)
ASTM D4003 - Standard Test Methods for Programmable Horizontal Impact Test for Shipping
Containers and Systems
ASTM D5277 - Standard Test Method for Performing Programmed Horizontal Impacts Using an
Inclined Impact Tester
Source: https://assist.dla.mil -- D3ownloaded: 2014-09-28T13:04Z Check the source to verify that this is the current version before use.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business