MIL-STD-1660A
1. SCOPE
1.1 Scope. This standard establishes minimum design criteria and associated tests for ammunition unit loads.
1.1.1 Non-ammunition unit loads. This standard will not be used for the palletization of general supplies or semi-perishable subsistence (see 6.1.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this standard. This section does not include documents cited in other sections of this standard or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this standard, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
INTERNATIONAL STANDARDIZATION AGREEMENTS
STANAG-2828 - Military Pallets, Packages and Containers
INTERNATIONAL STANDARDIZATION DOCUMENTS
AAP-23 - NATO Glossary of Packaging Terms and Definitions (English and French) DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-P-23312 - Pallets, Material Handling, Metal (for Ordnance Items); Mark 3 Mod 0, Mark 12 Mod 0 and Mark 12 Mod 1
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-648 - Design Criteria for Specialized Shipping Containers
MIL-STD-810 - Environmental Engineering Considerations and Laboratory Tests
MIL-STD-2073-1 - Standard Practice for Military Packaging
DEPARTMENT OF DEFENSE HANDBOOKS
MIL-HDBK-1791 - Designing for Internal Aerial Delivery in Fixed Wing Aircraft
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.2.2 Other Government documents, drawings, and publications. The following other Government documents, drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
AERONAUTICAL SYSTEMS CENTER
AFSC Design Handbook DH 1-11 - Air Transportability
(Copies of this document are available from the Aeronautical Systems Center, 2530 Loop Road West, Wright-Patterson AFB, OH 45433 or online at https://engineering.wpafb.af.mil/engstds/engstds.asp.)
Source: https://assist.dla.mil -- D1ownloaded: 2014-09-28T13:04Z Check the source to verify that this is the current version before use.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business