MIL-DTL-2427 Box, Ammunition Packing: Wood, NailedThis specification covers three types and nine classes of basic box designs having two exterior vertical cleats on each end as shown in figure 1. Also, it covers the closing and strapping requirements for filled boxes \(see Appendix A\), and prescribe the criteria to be utilized to determine the serviceability of Government furnished boxes \(see Appendix B\). The box may or may not have hinge and hasp hardware, rope handles and double end construction.

Pages 1 - - 2 - 3 - 4 - 5 - 6 - 7 - 8|||9 - 10 - 11 - 12|||

MIL-DTL-2427H (AR)

otherwise specified, the issues of these documents are those cited in the solicitation or

contract.

COMMERCIAL ITEM DESCRIPTIONS

A-A-55057

- Panels, Wood/Wood Based; Construction

and Decorative

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-129

- Military Marking for Shipment and Storage

MIL-STD-1916

- DOD Preferred Methods For Acceptance of

Products

(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/

or https://assist.daps.dla.mil or from the Standardization Documents Order Desk, 700 Robbins

Avenue, Building 4D, Philadelphia, PA 19111-5094.)

2.2.2 Other Government documents, drawings and publications. The following

other Government documents, drawings, and publications form a part of this document to

the extent specified herein. Unless otherwise specified, the issues of these documents are

those cited in the solicitation or contract.

U.S. ARMY ARMAMENT RESEARCH AND DEVELOPMENT CENTER

(ARDEC), DRAWINGS

8796520

Swivel Assembly

8796523

Hasp

8796524

Hinge

8797512

Swivel Assembly

(Copies of these drawings may be requested online at Drawing-Request@pica.army.mil

or from US Army ARDEC, ATTN: AMSRD-AAR-AIS-T, Picatinny, NJ 07806-5000.)

2.3 Non-government publications. The following documents form a part of this

document to the extent specified herein. Unless otherwise specified, the issues of the

documents are those cited in the solicitation or contract.

-3-