MIL-STD-1323A(OS)
1. SCOPE
1.1 Scope. This standard, consisting of a general document and dash numbered sheets, covers general and detail requirements for the construction of unit loads of ammunition, explosives, and associated items for shipping, handling, storage/stowage, and underway replenishment (transfer-at-sea).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this standard. This section does not include documents cited in other sections of this standard or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this standard, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-1320 - Standard Practice for Designing Unit Loads, Truckloads, Railcar Loads, and Intermodal Loads for Ammunition and Explosives
(Copies of this document are available online at https://quicksearch.dla.mil.)
2.3 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between
the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. DEFINITIONS
This section is not applicable to this standard.
4. GENERAL REQUIREMENTS
For general requirements, see MIL-STD-1320.
5. DETAILED REQUIREMENTS
For detailed requirements, see MIL-STD-1320.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
6.1 Intended use. This standard is intended for use by all personnel engaged in the construction of unit loads of ammunition, explosives, and associated items intended for underway replenishment (transfer-at-sea).
6.2 Acquisition requirements. Acquisition documents should specify the following:
a. Title, number, and date of this standard.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business